Brewly - Spare Parts

Stainless Whirlpool Arm with CAM-lock connector, makes it possible to create a whirlpool in the wort after the boil which increases volume efficiency and speeds up the cooling of the wort. Black neoprene handle.Brewly Whirlpool Arm CAM-lockLength: 40cm, usefull length 35cm.Material: Stainless Steel 304.

spare part. Stopper for the telescopic malt basket pipe so malt or grains cannot enter it during mashing in.

Brewly Stainless Ball valve barbed

Fine-mesh bottom filter to avoid larger particles in the wort during mashing. Also fits Brewolutions Brewster.diameter 355mm

Spare part. Brewly L-pipe for Brewly Brewery 40L and 70L Pump Inlet. Material is stainless steel. Keeps hop and malt debris at the bottom of the brewery from entering the pump inlet. May also fit Brewolution BB40 and BB70 which has similar construction.The pipe inlet is ca 40mm above the brewery's bottom. Total height avobe bottom is ca 45mm. The pipe length horizontally is ca 110mm.

Glass cap that fits both 40L and 70L Brewly breweries.

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm (1/2") barb at the opening (fits 1/2" hose).

Magnetic Pump MP-10RN, spare part for Brewly Breweries, also fits other breweries. Up to 12L/min. Very quiet, high quality, powerful magnetic pump that can handle wort/water up to 100°C, however its not recommended under sustained periods. Perfect for recirkulating wort and transfer of wort/drikning water. Standard 14mm inlet/outlet.Do not run the pump dry.Specifications Brewly Magnetic Pump MP-10RNCapacity: max 12 L/min (60Hz)Head: max 2,1 meters (60Hz)Power rating: 6WVoltage: 220-240V (50-60Hz)Protection: IP44Tube Interface Inlet: 14 mmTube Interface Outlet: 14 mmNote: Do not run the pump dry

Brewly MP-15RN Magnetic pump 10W, IP44. 5/8" (16mm) input and 5/8" (16mm) output (points upward), not threaded.

Brewly Volume Pipe 40L - Spare Part

Brewly Volume Pipe 70L - Spare Part

Brewly O-ring Kit for 40/70L Brewery - Spare Part. (1 pc of all o-rings used)

Brewly Flexible Recirculating Arm 40-70L. Spare Part.

Brewly Racking Arm for Conical Fermenter with 2pcs silicone o-rings with 9mm outer diameter and 6mm inner diameter, thickness ca 1,5mm.

Brewly O-ring Kit for 40L/70L brewery. Spare parts.

Brewly Bottom Grain Basket Plate for 40L & 70L Brewery. Spare part. Also fits Brewolutions Brewster.

Brewly Top Grain Basket Plate for 40L & 70L Brewery. Spare part. Also fits Brewolutions Brewster.

Brewly Large Pump Hose Adaptor for 40L & 70L Brewery. Silicone. Spare part.

Brewly Small Pump Hose Adaptor for 40L & 70L Brewery. Silicone. Spare part.

Spare part. Brewly Malt Basket Ring for 40L/70L Brewery

Brewly 40L Perforated Malt Basket. New open, perforated design for high wort flow. 304 Stainless steel. Höjd: ca 33,5 cmdiameter uppe: ca 37 cmdiameter nere: ca 35 cm

Brewly 70L V2 Perforated Malt Basket. New open, perforated design for high wort flow. 304 Stainless steel. NOTE! Fits only Brewly V2 brewery, not V1 or forst generation 65L & 70L. height: ca 33,5 cmdiameter up: ca 37 cmdiameter down: ca 35 cm

Spare part. Brewly Telescopic Malt Basket Tube 40L.

Spare part. Brewly Telescopic Malt Basket Tube 40L.