Accessories

A removable clamp-lock is designed for dispensing drinks into the champagne bottles, for iTap and iTap 2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various - bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2 (and all X models).

iTap for 26mm crown bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or counter-pressure fill your bottles safely without any issues.This model comes with a clamp lock for 26mm crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

iTap X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or fill your bottles safely with counter pressure without any issues. This model comes with a clamp lock for 28mm PET bottles. 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

This easy to use and compact Spunding valve is handy for keg transfers or pressurized fermentations when you want to limit oxygen exposure and use counter pressure in the keg you are filling into or in the fermenter you are using.  This new improved G2 model has several upgrades: 1. duotight fitting where the gauge attaches- This allows for a multitude of different options such as digital gauge or larger gauge to be purchased separately and upgraded. 2. Manual ring pull pressure relief- This allows for you to not only adjust the pressure with the black rotary knob but also use the ring pull to instantly release pressure if you want to release manually. 3. Option for Several Colour Coded PRVs to be usedKL22569 - Yellow - 1.2bar (17psi)KL05333 - Red - 2.5bar (35psi)KL09164 - Green - 4.5bar (65psi)KL03070 - Grey - 7bar (100psi) This is a low profile opton only 4.5cm in height.  This spunding valve fits to standard gas posts on your fermenter or keg.

Kegland has created the world's smallest digital manometer (gauge) with a backlit screen. It is robust, very accurate and has a long battery life (the battery lasts for several years if it is only read once a day). The pressure gauge can display the pressure in units such as PSI, KPA and BAR. It can measure pressures up to 6.2 bar (90 psi). It is perfect for Inline Regulator, Blowtie2 and Mini 360 Core Actuator Regulator.To display the pressure value, press the red button. To turn on the backlight, hold down the yellow button. To select device, press the yellow button several times. The screen turns off automatically after 15 seconds to save battery. Please note that the pressure gauge is only intended for gas and must not be exposed to liquid. Always use a check valve if there is a risk of backflow to the regulator.Specifications:Accuracy: +/- 1% at 20°C< br />Battery: CR2032 (included)Battery time: Over 2 years when reading once per day.Size: 27 mm x 27 mmDimensions of coupling: Ø 7.8 mm (5/16") with O-ring.

Mangrove Jack's Carbonation Drops 200g

Muntons Carbonation Drops 160g

Handy telescopic counter pressure bottle filler - Bottle without foam or exposure to oxygen. Fits standard beer taps or fit a beer line to the unit. Fits most bottles. It fits standard beer taps and is a great way to rack off a few bottles for competition or package beer into bottles. Easy removal of the telescopic tubing for cleaning! This unit comes complete with wide range of accessories sincluding carbonation cap so you can quick disconnect your beer line, duotights so you can fit a beer line to the unit and other usefull fittings you might need.The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels. It's completely made from stainless steel with no aluminium or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. Its very compact and and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" General thread. We also supply other accessories so you can attach a beer line to this unit for other filling methods too. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature.NOTE: This cannot be used with taps with a vent hole but will fit pretty much all forward sealing taps on the market such as the Nukatap SS, Nukatap FC, Perlick and other brands.Link to Users manual:Click here

Patent Bottle Cap (Swing Top) with gasket 40mm

Patent Bottle Cork (Swing Top) with gasket - Ceramic. 1pc.

Patent Bottle Cork (Swingtop) with Gasket - Plastic 12-pack

Patent Cork Washer Red Rubber 6/22mm (Swing Top gasket). 22mm outer diameter and 6mm hole in the middle. note: 1pc washer

20-pack Patent Cork Washer Red Rubber 6/22mm (Swing Top gasket). 22mm outer diameter and 6mm hole in the middle. note: 20-pack washer

Silicone washer for patent corks White/Transparent or black. 40mm outer diameter and 16mm hole in the middle.

White/natural Silicone washer for patent corks White/Transparent. 22mm outer diameter and 6mm hole in the middle.

Pump Auto siphon 33cm with 1,5m tube with holder and clip.

Pump siphon 44cm with 1,5m tube, holder & clamp. Auto siphon.

Pump siphon 45cm with 1,2m tube. Auto siphon. Note: Clip and clamp are bought seperately.Length: 45cmDiamater pipe: 20mmLength hose: 120cmDiameter hose: 12mmInner diameter hose: 9mm (3/8")

Clamp/holder for the Pump Siphons. Keeps them steadier when used with a fermenter. Black plastic. Fits all pump siphons with around 23mm diameter.

Pump siphon Gasket for 33 & 44cm (spare part). Hard plastic, fits 23mm pipe.

Stainless steel Pump siphon 44cm with 1m hose and holder. Auto siphon. Total Length: 50cm. Hose Inner diameter: 9mm (3/8")