Accessories

Can Carrier for 4 cans 10-pack. Can carriers are the solution to pack your cans. Easy to handle, eco-friendly and efficient! Pack your cans by four!

Can Carrier for 6 cans 10-pack. Can carriers are the solution to pack your cans. Easy to handle, eco-friendly and efficient! Pack your cans by six!

Brewly ACS Can Adaptors 3-pack 330ml Standard, 440ml Standard & 330ml Sleek. Work with all Brewly ACS canning machines.

Brewly ACS Can Adaptor 250ml Sleek. Adaptor for using the Brewly ACS Can Sealer with 250ml Sleek cans.PLEASE NOTE: This adaptor does NOT fit the 250ml SLIM can, only 250ml SLEEK. The SLEEK can is 115mm high and 58mm diameter while the 250ml SLIM is 135mm high and 50mm diameter.

Brewly ACS Can Adaptor 250ml SLIM. Adaptor for using the Brewly ACS Can Sealer with 250ml SLIM cans. Fits SLIM cans with measurements ca 50mm diameter and 135mm height.PLEASE NOTE: This adaptor does NOT fit the 250ml SLEEK can, only 250ml SLIM. The SLEEK can is 115mm high and 58mm diameter while the 250ml SLIM is 135mm high and 50mm diameter.

Brewly ACS Can Adaptor 330ml Sleek. Adaptor for using the Brewly ACS Can Sealer with 330ml Sleek cans.

Brewly ACS Can Adaptor 330ml Standard. Adaptor for using the Brewly ACS Can Sealer with 330ml Standard cans.

Brewly ACS Can Adaptor 440ml Standard. Adaptor for using the Brewly ACS Can Sealer with 440ml Standard cans.

Spare part. Brewly ACS Can Adaptor 500ml Standard. Adaptor for using the Brewly ACS Can Sealer with 500ml Standard cans. This is the main adaptor that fits directly on the turntable.

Brewly Turntable Nut Tool. Steel.

This splash guard is made from strong polycarbonate and 304 grade stainless bolts.  It comes flat packed and can easily be assembled with an allen key.

This chuck is the chuck that is sold as a separate part so that the Cannular Bench Top Canning Machine (as well as the Semi-Auto Pro version) can be used with Visy/CDLE ends (202 CDL). No need to change over the rolls just switch over the chuck, make some fine adjustments to the rolls and table height and you can be seaming CDLE ends in no time at all. Most aluminium can bodies are made the same and are made to the same 202 standard. With that said two major competing manufacturers in the world make the lids for these 202 cans. The B64 is the standard lid that we sell in most of the cans you can purchase here in the 500ml variety or here in the 330ml variety. Both these 202 can designs will also fit other CDLE ends if you wanted to use your own CDLE ends for some reason.Two Major Competitors ExplainedIn the world of canning two major competitors exist that have developed the lids for aluminium beverage cans. These are "Ardagh Group" (a European Based Company) that mostly supply the CDL type ends and "Ball" (an American Based Company) that mostly supplies the B64 and a few other end types. Between the CDL and B64 ends these are the two dominant end types for 202 can bodies. Naturally in America we mainly see the B64 ends being used and in Europe we see more CDL ends being used.CDLE Ends ExplainedCDLE ends are the main end type sold by VISY as Visy licence this technology from Ardah Group. Some people loosely refer to the CDLE end as a CDL end but the technical name for this particular type of end is CDLE not CDL. This is not to be confused with the CDLE's predecessor which was CDL+.Specification:Made from hardened stainless steelMachined to 20 micron toleranceFits to 19mm drive shaftTighten using 3mm allen key

This add on table spacer has been designed to work with our Cannular Can Seamer (NOT for Semi-Auto Pro). As you would know the Can Seamer has been designed to work with the 500ml cans right out of the box however for smaller cans such as the 330ml and 375ml cans this type of spacer is required to lift the can up a bit higher.This particular table spacer has been designed to work with the KegLand 330ml Cans (KL13093) but it can also work with various other brands of cans from 330ml - 375ml.

This add on table spacer has been designed to work with our Cannular Can Seamer (NOT for Semi-Auto Pro). As you would know the Can Seamer has been designed to work with the 500ml cans right out of the box however for cans such as the 44cl cans this type of spacer is required to lift the can up a bit higher.

Brewly ACS-1 Turntable Ball Bearing - Spare part

Brewly ACS-1 Turntable Ball Bearing - Spare part