Connectors

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Ball lock connector with Flow Control, to adjust resistance easily without the introduction of turbulence which creates foam. With Duotight 8 mm (5/16"). For liquid/beer.

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

Self-closing quick disconnect for ball lock cornelius kegs. Whte/Grey coupling that fits on the gas post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

You can now have a check valve integrated into your ball lock disconnect. These clear/grey high quality plastic disconnects are very common in the industry but now have the added feature of having a check valve integrated into the fitting. The internal parts are made from stainless steel and the body is clear so you can see whats inside.With the MFL thread you can attach: - Barb fitting (Swivel Nut & Barb)- 8mm push in fitting- Mini All In One Regulator- Premium Mini Regulator

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

Self-closing quick disconnect for ball lock cornelius kegs. White/grey coupling that fits on the gas post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

Ball coupling with integrated Duotight 6.35mm (1/4") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 1/4" outer diameter.

Ball lock disconnect with integrated Duotight 6,35mm (1/4") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 8mm outer diameter.

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

Ball coupling with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 9,5mm outer diameter.

Ball lock disconnect with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

The Brewly Tap Quick Connect Kit (1/2" BSP/NPT) fits most tap faucets on breweries and sparge water heaters, and is perfect for those who want to recirculate in a brewery or other with, for example, an external pump. Fits 10mm and 12mm silicone hose, max outer diameter 14mm. Stiffer hoses such as PVC need to have an inner diameter of approx. 12mm to fit. Contains:- 1 copper coupling with ball coupling (female) at one end and 1/2" BSP (NPT) coupling at the other- 1 steel coupling with a ball coupling (male) at one end and 1/2" BSP (NPT) threads at the other, which fits, for example, a standard tap faucet (see link below).

Butterfly Tap 15mm

Butterfly Tap Medium Conical 9,5–11,5–13mm

Butterfly Tap Micro Conical 8,5–11,5mm

Connector Hex Nipple 1/2" BSP to 1/2" BSP Stainless Steel. Can be fitted both to BSP and NPT threads.

Connector Hex Nipple Threaded 3/8" BSP to 3/8" BSP (NPT) Stainless Steel. Fits both BSP and NPT threads.

Connector Internal Threaded Pipe Socket 1/2" BSP (NPT). Stainless Steel. Fits both BSP and NPT threads.

Connector Internal Threaded Pipe Socket 3/8" BSP (NPT). Stainless Steel. Fits both BSP and NPT threads.

Connector Threaded Stainless 3/8" Female - 1/2" Male BSP. Stainless Steel.

Coupling 1/2" MPT - 12 mm Barb. Stainless Steel.

This 100 Mesh filter with 8mm (5/16") duotight pushfit connectors is designed to remove larger particles easily and efficiently, which can help protect your brewing equipment and can also be used as a home inline water filter. It can also be used as a light-duty keg to keg hop filter. Just ensure you have cold crashed and sanitized efficiently prior to use.It is made from food-grade Acetal plastic and has a 100 mesh. The 8mm (5/16") duotight fittings make it simple and easy just pushing it in the compatible and recommended tubing.Please note:The filter is designed for it to be mounted near your water inlet and away from direct sunlight.Always test for leaks prior to leaving the filter unattended.If water supply exceeds 100psi, we advise using an inline water filter and duotight reducers/splicers.

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 9.5mm (3/8”) Pushfit x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 9.5mm (3/8”) Pushfit x 1/2” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Duotight Valve Connector 3/8" - 3/8" pushfit.

Duotight Valve Connector 8mm (5/16") pushfit.

Adapter that fits many types of kitchen faucets. The Faucet Adapter has four different threads, with two threads at each side of the adapter. This makes the adapter fit hose barb couplings, quick disconnects, wort chillers, bottle jet washers and similar.Threads:M22x1 female threadM24x1 male threadM22x1 male thread3/4" GHT male threadBefore installation it might be necessary to remove the aerator and gasket from the faucet. Install the Faucet Adapter gently, without damaging the threads of the kitchen faucet.Made of chrome-plated brass.One rubber gasket 22 x 3 mm included.

If you want an easy way to balance your beer lines this is the way to do it.  Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.  One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily.This stainless steel ball lock disconnect is quality machined from stainless steel with MFL thread.  It's ideally used with duotight MFL fittings.

Fluidfit® HUC push-fit connection (pushfit) straight connection, available in several sizes. Select the size you want from the drop-down menu.

Fluidfit® HCVU push-fit connection (pushfit) check valve, available in several sizes. Select the size you want from the drop-down menu.

Fluidfit® HLJ elbow push-fit elbow connection, available in several sizes. Select the size you want from the drop-down menu.

FluidFit® HBMU-I water filter with 100 mesh with 3/8" quick-connect connection (so-called pushfit).

Fluidfit® HBUJ push-fit connection 4-way cooling coupling for installation on keg coupler

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

Fluidfit® HCF-UNF push-fit connection connection with female 1/4" thread UNF - connector. For 5/16" hose. N1/4" (UNF7/16-20G) and 5/16" pushfit.

Fluidfit® HCF 1/2" push-fit connection with female 1/2" BSPP thread.

Fluidfit® HCF-UNF 3/8" push-fit connection with female 1/2" BSPP thread.

Fluidfit® HCF-UNF push-fit connection connection with female 1/4" thread UNF - connector adaptor. For 3/8" hose. N1/4" and 3/8" pushfit.

Fluidfit® HCF-UNF push-fit connection connection with female 7/16" thread UNF - connector adaptor for threaded ball disconnects. For 3/8" hose. UNF 7/16" and 3/8" pushfit.

Fluidfit HLJB3/8-3/8G - Elbow 3/8" straight stem for pushfit to 3/8" Barb. 3/8" = 9,5mm. Beer or Gas. Pushfit.

Fluidfit HLJB3/8-5/16G - Elbow 3/8" straight stem to 5/16" Barb. Straight stem for pushfit. Beer or Gas. Pushfit.

FluidFit® HPC-MFL Quick coupling 3/8" (so-called pushfit) with external thread 1/4" MFL. Fits, for example, in regulators instead of a nipple for the gas. 1/4" MFL male to 3/8" hose.

Fluidfit® HPC-I push-fit connection with male thread NPTF.