Malt Mills

For perfectly milled grains, ease of use and superior dependability, look no further than Brewly Malt Crusher 2 - A 2-roller grain mill with metal base. The Malt Crusher 2 achieves the ideal crush for your brewery. It features a fully adjustable roller gap from 0.6mm (0.025") all the way to 2.5mm (0.1”), allowing you to finely tune your crush to your exact preference. Features include SS304 stainless steel rollers, sealed bearings, a 3.5kg (7lb) capacity grain hopper, an ergonomic crank handle, and unlike other available grain mills, this Malt Crusher 2 comes complete with a sturdy metal base that fits perfectly on bottling/fermenting buckets. Use either the hand-crank or a power drill with low-RPM and 3/8” chuck.Contains:- Malt Mill with 2 rollers- Grain hopper for up to 3,5kg (7lb) malt with screws and silicone gaskets- Solid black steel base plate- Hand crankNote: The blue protective plastic layer can easily be removed.

For perfectly milled grains, ease of use and superior dependability, look no further than Brewly Malt Crusher 3 - A 3-roller grain mill with metal base. The Malt Crusher 3 achieves the ideal crush for your brewery. It features a fully adjustable roller gap from 0.6mm (0.025") all the way to 2.5mm (0.1”), allowing you to finely tune your crush to your exact preference. Features include SS304 stainless steel rollers, sealed bearings, a 7kg (15lb) capacity grain hopper, an ergonomic crank handle, and unlike other available grain mills, this Malt Crusher 3 comes complete with a sturdy metal base that fits perfectly on bottling/fermenting buckets. Use either the hand-crank or a power drill with low-RPM and 3/8” chuck.Contains:- Malt Mill with 3 rollers- Grain hopper for up to 7kg (15lb) malt with screws and rubber gaskets- Protective steel grid in bottom of hopper- Solid black steel base plate- Hand crankNote: The blue protective plastic layer can easily be removed.

For perfectly milled grains, ease of use and superior dependability, look no further than Brewly Malt Mill 3 - A 3-roller grain mill with metal rod base. The Malt Mill 3 achieves the ideal crush for your brewery. It features a fully adjustable roller gap from 0.6mm (0.025") all the way to 2.5mm (0.1”), allowing you to finely tune your crush to your exact preference. Features include SS304 stainless steel rollers, sealed bearings, a 5kg (11lb) capacity grain hopper, an ergonomic crank handle, and unlike other available grain mills, this Malt Mill 3 comes complete with a sturdy metal rod base that fits perfectly on bottling/fermenting buckets. Use either the hand-crank or a power drill with low-RPM and 3/8” chuck.Contains:- Malt Mill with 3 rollers- Grain hopper for up to 5kg (11lb) malt with screws- Solid metal rods for base support- Hand crankSpecifications:- 3-steel rollers: Stainless steel- Grinder housing: Aluminum 6061- Hoppers: Stainless steel- Total height: 280mm- Hopper dimensions at top: 223 x 210mm- Footprint size of grinder: 150 x 88mm- Dimensions: 85 x 150 x 80mm- Steel Rollers: ø 32 x 125mm - Adjustable distance: 0,025 - 0,1 inch (0.635 - 2,54 mm)- Crank handle: 200mmNote: The protective plastic layer can easily be removed.

The Electric Grain Mill with Mounting Board is motorised, compact and easy to use at home. It’s equipped with large, fluted rollers that crack the outer husk of the grain longitudinally, providing optimal surface area for your mash and a better filter bed for your sparge. Add different base malts and specialty grains to the removable hopper, change the speed of the motor and watch it crush up to 1.7kg of grain per minute!The removable grain hopper holds up to 1kg of grain at a time and with 10 easily adjustable gap settings, ranging from 0.8mm to 2mm, this mill has been engineered to crush a variety of grains. Crush different base malts and specialty grains, and even change the rate that your grain is crushed with the variable speed dial.It’s easy to mount onto a workbench or bucket, but it works best with the Grain Mill Bamboo Mounting Board. Plus, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set your desired gap setting by pulling the spring-loaded pin and rotating the dial. Add grain to the hopper and flick the switch to begin crushing.For more information on assembling and using the Electric Grain Mill, watch our YouTube video here.Now you can create fresher batches of beer by bulk buying your own grain and crushing it at home, just before you brew.A bamboo wood mounting board is included.Voltage: 220 - 240VFrequency: 50HzPower: 400WRollers: 58mm diameter and made of hardened stainless steel with a flute design that’s akin to commercial grain mills10 mill gap settings: 0.8mm - 2mmCrush rate: up to 1.7kg of grain per minuteGrain hopper capacity: 1kg

Spare part: Roller (crush roller) to Bulldog Malt Mill. 1pcs (2pcs are needed)