Gravity measure

Brewly Dual Scale Refractometer with ATC 32°Brix/SG1.130

Brewly Dual Scale Refractometer with ATC 32°Brix/SG1.130

Refractometer with Automatic Temperature Correction (ATC) and dual scales: 0-32°Brix and up to SG 1.130.

€37
€28
DEAL
Hydrometer Beer

Hydrometer Beer

Hydrometer for beer. 0-120 °Oechsle scale. The appearance of the meter may vary.

€4,5
Better Brew Hydrometer 3-scale

Better Brew Hydrometer 3-scale

Better Brew Hydrometer with 3 scales.

€4,5
Measuring Kit - Hydrometer Beer & Measuring Cylinder

Measuring Kit - Hydrometer Beer & Measuring Cylinder

The Measuring Kit comprises of a Hydrometer and a Measuring Cylinder 100ml.

€8
€7,2
DEAL
Measuring Kit for Wine Cider & Mead

Measuring Kit for Wine Cider & Mead

The Measuring Kit comprises of a Hydrometer 3-scale and a Measuring Cylinder 100ml.

€8
€7,2
DEAL
Hydrometer Alcohol Blue with plastic cylinder

Hydrometer Alcohol Blue with plastic cylinder

Hydrometer with graded cylinder for measuring alcohol in spirits, 0-100%. NOTE: Does not work on beer, wine or liqueurs.

€4,5
Temporarily out of stock
View product
Better Brew Vinometer Wine Alcohol Meter

Better Brew Vinometer Wine Alcohol Meter

Use the Wine Alcohol Meter for quick determination of the alcohol content in wine and mash. Graded in vol% for use at normal room temperature (15°C). Hold the instrument vertically with the funnel upwards. Pour some wine or mash into the funnel. As soon as a few drops appear in the lower part of the tube, the instrument should be turned upside down and placed on a table with the funnel as a base.The wine then flows down the graduated capillary tube. Where the upper surface of the wine or mash stops, the alohol percentage can be read against the scale, the liquid column must be free of air bubbles. Clean the vinometer thoroughly before and after each use.The vinometer measures approx. 13 cm long.

€4,5
Vinometer Wine Alcohol Meter

Vinometer Wine Alcohol Meter

Use the Wine Alcohol Meter for quick determination of the alcohol content in wine and mash. Graded in vol% for use at normal room temperature (15°C). Hold the instrument vertically with the funnel upwards. Pour some wine or mash into the funnel. As soon as a few drops appear in the lower part of the tube, the instrument should be turned upside down and placed on a table with the funnel as a base.The wine then flows down the graduated capillary tube. Where the upper surface of the wine or mash stops, the alohol percentage can be read against the scale, the liquid column must be free of air bubbles. Clean the vinometer thoroughly before and after each use.The vinometer measures approx. 13 cm long.

€4,5
Temporarily out of stock
View product
RAPT Pill Wifi-Bluetooth Hydrometer & Thermometer

RAPT Pill Wifi-Bluetooth Hydrometer & Thermometer

The RAPT Pill provides accurate real-time density (SG) and temperature measurement and control via the WiFi/Bluetooth integration with the RAPT mobile app/RAPT IOT. Made to measure in your fermenter!RAPT Pill provides accurate specific gravity (SG) and real-time temperature logging and control via wifi/bluetooth. The RAPT pill functions as both a hydrometer and thermometer for real-time gravity testing, enabling instant gravity and temperature measurements and also logs from inside the fermenter during fermentation.The RAPT Pill has many advantages over other wireless hydrometers and thermometers including rugged design, better ergonomics, sanitary design and less prone to errors as a result of hops, krausen or CO2 bubbles generated from fermentation.Specifications:The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!Note:Make sure the RAPT pill is charged for 24 hours before use. This is to ensure that it is fully charged and that the battery is calibrated.When the RAPT Pill is connected via USB-C and connected to wifi, the firmware will automatically update to the current version (if needed). Pill must be connected via USB-C and connected to Wi-Fi to receive firmware updates. What is RAPT?RAPT IOT Hub is a free service where all RAPT-enabled products can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to remotely control your devices giving you absolute control over your device no matter where you are. The RAPT portal enables you to make complex temperature profiles involving different temperature settings over time, meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so that you can receive email notifications if something does not go according to plan.There is no limit to the number of RAPT devices you can connect RAPT IOT Hub. This is unlike other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.Please note: RAPT Pill is fully Wi-Fi and Bluetooth compatible. Currently, it can be fully integrated with wifi. Bluetooth integration will be enabled with a later firmware update.GoogleThe Google Play Android app can be downloaded from the link below.https://play.google.com/store/apps/details?id=io.raptAppleThe Apple App Store RAPT app can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website is rendered to a mobile device screen increasing the usability on your device. It also gives you the added functionality of push notifications to your mobile device."

€90
Volume discount!
€78 per piece when you buy 2 or more
Milwaukee MA885 Digital Brix/Oechsle/KMW Refractometer with ATC

Milwaukee MA885 Digital Brix/Oechsle/KMW Refractometer with ATC

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals to brewers and wine makers, have moved to digital MA885 Digital Brix / °Oechsle (°Oe) and °KMW (°Babo) meter for measurement of must and grapes from less accurate and less precise optical refractometers. Batteries are included.The Milwaukee digital Brix/°Oechsle (°Oe) / KMW (°Babo) refractometer is temperature compensated with a 0 to 50% Brix / 0 to 230°Oechsle °Oe) 0 to 42 / °KMW (°Babo) range and +/- 0.2% Brix / +/-1°Oechsle / +/-0.2 °KMW accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. The MA885 eliminates the uncertainty of optical refractometers by providing and accurate digital readout.DESIGN FEATURES- Fast, accurate results with digital dual level LCD readout.- Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.- Simple one-point calibration using distilled or deionized water.- Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.- Battery percent level indicator with automatic shut-off (batteries included).- Ideal for winemakers, brewers, syrup producers, food producers and many other applications.- The conversion used is based on the ICUMSA Methods Book (International Commission for Uniform Methods of Sugar Analysis).SPECIFICATIONSRange: 0 to 50% Brix | 0 to 230°Oechsle (°Oe) | 0 to 42 °KMW (°Babo)| Temperature 0 to 80°C / 32 to 176°FResolution: 0.1 Brix | 1°Oechsle (°Oe) | 0.1 °KMW (°Babo) | 0.1°C / 0.1°FAccuracy: ±0.2% Brix | ±1°Oechsle (°Oe) | ±0.2°KMW (°Babo) | ±0.3°C / ±0.5°FLight Source: Yellow LEDMeasurement Time: Approximately 1.5 secondsMinimum Sample: Volume 100 µL or 2 metrics drops (cover prism totally)Sample Cell: Stainless steel ring and flint glass prismTemperature Compensation: Automatic between 10 and 40°C / 50 to 104°FEnclosure rating: IP65Case Material: ABSBattery Type: 1 x 9V AA (included)Battery Life: 5000 hours reading with auto-shut off after 3 minutes of non-useDimensions Meter: 7.6 x 4.0 x 2.64 inches (192 x 102 x 67 mm)Weight Meter: .93 lbs. (0.42 kg)Dimensions Package: 11 x 6.8 x 4.60 inches (268 x 172 x 118 mm)Weight Packaged: 1.46 lbs. (0.66 kg)WHAT PEOPLE ARE SAYING"Anyone who produces wine, grape juice, maple syrup or craft beer should find this product one of the best investments they make on any piece of equipment.""I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers.""Dramatically improved my commercial brewing consistency & efficiency. Now I can quickly stop my sparge when I get to to my OG.""I used this for finishing Maple Syrup. I had been trying to determine sugar content using temperature and a hydrometer. I found both very difficult to use. The refractometer was much easier."

€164
Temporarily out of stock
Expected in stock: 2024-12-04
View product
Tilt PRO Hydrometer and Thermometer - Blue

Tilt PRO Hydrometer and Thermometer - Blue

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€255
€247
DEAL
Temporarily out of stock
View product
Tilt PRO Hydrometer and Thermometer - Orange

Tilt PRO Hydrometer and Thermometer - Orange

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€255
€247
DEAL
Tilt PRO Hydrometer and Thermometer - Black

Tilt PRO Hydrometer and Thermometer - Black

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€255
€247
DEAL
Temporarily out of stock
View product
Tilt PRO Hydrometer and Thermometer - Green

Tilt PRO Hydrometer and Thermometer - Green

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€255
€247
DEAL
Tilt PRO Hydrometer and Thermometer - Red

Tilt PRO Hydrometer and Thermometer - Red

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€255
€247
DEAL
Tilt Hydrometer and Thermometer - Red

Tilt Hydrometer and Thermometer - Red

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€146
€144
DEAL
Temporarily out of stock
View product
Tilt Hydrometer and Thermometer - Orange

Tilt Hydrometer and Thermometer - Orange

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€146
€144
DEAL
Temporarily out of stock
View product
Tilt Hydrometer and Thermometer - Green

Tilt Hydrometer and Thermometer - Green

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€146
€144
DEAL
Temporarily out of stock
View product
Tilt Hydrometer and Thermometer - Blue

Tilt Hydrometer and Thermometer - Blue

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€146
€144
DEAL
Temporarily out of stock
View product
Tilt Hydrometer and Thermometer - Black

Tilt Hydrometer and Thermometer - Black

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

€146
€144
DEAL
Temporarily out of stock
View product
Tilt Repeater

Tilt Repeater

Designed for stainless steel fermenting vessels, the Tilt repeater extends range of your Tilt hydrometer so it can reach more convenient locations where you might have a tablet, phone, or Tilt Pi plugged in for continuous automatic logging. Repeater can repeat signal from one Tilt at a time as long as signal is strong enough. It is waterproof and has a 6 month battery life with included USB-micro rechargeable li-ion battery. Repeater updates at least once every 2 minutes.After six months of testing, the Tilt repeater is finally available for purchase. We have been testing with stainless steel fermentors and kegs with great success. The repeater can be placed inside a refrigerator along with a keg or fermenter to push the signal out to phones, tablets, and Raspberry Pi logging solutions.Instructions for use are as follows:Unscrew caps on each end the plastic enclosure. Gently push out electronics assembly. Using the color key located on the battery holder, press the button repeatedly to select the desired Tilt hydrometer color to repeat. For example press the button once to repeat a red Tilt or twice to repeat a green Tilt. To turn the repeater off, press the button repeatedly until the LED blinks red.Confirm desired color selected by opening the Tilt app and verifying selected color shows an initial specific gravity of 0.000 and temperature of 0°F (-17.8°C). Once the repeater connects (indicated by periodic green LED flash) it will show the actual repeated values.Return assembly to tube and screw caps back on. Place repeater as close as possible to Tilt hydrometer (but still outside fermentor) and verify green LED flashes indicating a connection.

€91
Temporarily out of stock
View product
Graviator - Wireless Wifi & Bluetooth Hydrometer

Graviator - Wireless Wifi & Bluetooth Hydrometer

A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.Please observe! The Graviator does not work with steel fermenters.

€147
Graviator - Wireless Charger

Graviator - Wireless Charger

Graviator Wireless Charger can charge a Graviator of approx. 5 hours. The charger follows the Qi standard and can charge with 5W / 7.5W / 10W. This charger will also work with your phone if it's Qi-enabled.

€13