FermZilla Tri-Conical Gen3 Starter Kit 27L Fermenter

Spare part. FermZilla Lid Seal O-ring. Fits FermZilla 27L, 35L and 55L.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Red Plastic Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floater & 60cm Silicone Dip Tube

FermZilla 60cm silicone dip tube and stainless float. Ensure that only the top layer of beer is poured from the Fermzilla/Fermentasaurus.

FermZilla Hop Bong is a versatile accessory, capable of pressurized dry hopping and oxygen purged hops into fermenters. And also as an inline carbonation/oxygenation accessory.Capacity in Hop Pellets:150g to 180gNamed purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid.Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.Includes:1 x KL05333 Red 35psi PRV1 x KL20176 PCO1881 PRV Cap1 x KL23627 - PCO1881 Male x 2 Inch Tri-Clover (POK)3 x KL03438 - 2 Inch TC Clamp Beaded Seal3 x KL03322 - 2 Inch TC 2 Segment Clamp1 x KL26079 - 2 Inch Hop Bong1 x KL10788 RED Multi Gas Post Plastic Carbonation Cap1 x KL27564 - 2 Inch x 2 Inch Butterfly Valve1 x KL22569 Yellow 17psi PRV1 x KL35965 - 4 Inch TC Pressure Lid with 2 Inch TC PortPlease note that the Hop Bong is not made from glass. It is made from special engineering plastic.

The valve makes it possible to dry hop with a regular soda bottle on a FermZilla. You put some hops in a threaded bottle, attach the valve, and put it onto the lid of the FermZilla. An easy and cheap tool for dry hopping.If you also use a Carbonation Cap T-Piece and a Line Cleaning and Carbonation Cap you will be able to use Co2 to remove the oxygen from the hops.Stainless steel ball valve with a approx. 20 mm bore and O-ring in both ends.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. Stainless steel.Brewly Stainless Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x SS Float & 80cm Silicone Dip TubeThis inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all together.

This Hose Kit that makes it very easy to rinse kegs with water. Its also perfect if you want to fill a keg with water for making sparkling water. Fits ball lock cornelius kegs, and other kegs with ball lock disconnects. The threaded ball lock disconnects fits both gas and liquid (beer) ball lock posts. Here's how you can clean Cornelius kegs:1. Release the excess pressure in the keg and open the lid. Empty if there is any left.2. Connect the gardena coupling to a water tap and the ball-lock disconnect to the keg.3. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.4. Set the barrel up and fill up with hot water and add e.g. PBW.5. Replace the lid and flush some detergent through both gas and liquid posts and the safety valve. Leave for about 15 minutes.6. Release the excess pressure and open the lid. Empty the cleaning agent (or transfer to the next keg if you are cleaning several at the same time).7. Connect the gardena coupling to a water tap and the disconnect to the keg.8. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.9. Sanitize the keg with e.g. Star San just before filling the next batch. Tip: Buy a threaded PET adapter and you can also easily rinse your beer lines too.