FluidFit® HPC-MFL Quick coupling 3/8" (so-called pushfit) with external thread 1/4" MFL. Fits, for example, in regulators instead of a nipple for the gas. 1/4" MFL male to 3/8" hose.

Kegland EVABarrier double walled tubing with EVA outer wall and an inner proprietary polymer barrier. 3mm (1/8") inner diameter and 6,35mm (1/4") outer diameter. Fits Kegland and Duotight 6,35mm products.Pressure Rating (with 1.5 safety factor)30 grader Celcius - 1.4 MPa (200psi) = ca 13 bar50 grader Celcius - 0.7MPa (100psi) = ca 6,5 barPlease Note: Sold per meter, so if you choose 2 in the select box you will get 2 meters of hose. Measurements may differ circa +/- 10mm.

Connection kit for iTap for carbonation and bottling if you already have iTap, keg for ball couplings, regulator with 3/8" female and sodastream carbonation cartridge. Contains all couplings, adapters and tubing needed (tube comes in a full length that can be cut to suitable lengths ). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.NOTE! Does not include iTap, keg for ball lock, regulator with 3/8" female or sodastream carbonation cartridge.

PET Keg 20L Oxebar Amber from Kegland with Ball Lock connectors, Dip Tube, Floater & Handle is a very easy and convenient way to store and transport beer compared to heavy and bulky steel kegs like Cornelius kegs. It's a very inexpensive way to serve draft beer and bring beer to all kinds of events. Because it can be washed and reused, it's also an inexpensive way to store your beer. Do not exceed 4 Bar / 65psi. With the special polymer mixture, the oxygen barrier is improved three times compared to regular PET. Beer can easily be stored up to 6 months in these kegs. Diameter 235mmHeight 640mm  Do not exceed 4 Bar / 65psi. Contains:- 20L PET Keg Oxebar Amber Mono Barrier- Lid with handle- Green relief valve (65 psi/4.5 bar)- 1 meter silicone hose (dip tube) with floater and filter- Red Ball Cap for FermZilla, Carbonation Cap- Yellow Ball Cap for FermZilla, Carbonation Cap

Dual Pressure CO2 regulator MK4. Precise regulator of high quality. These are 2 MK4 regulators that are connected together, so that you get 2 outputs with individual pressure adjustment.  Thread type for connecting CO2 bottle: Type 30 (Australia/NZ), compatible with Nordic CO2 standard DIN-477 No. 6 / W 21.8 x 1/14" The outputs have 1/4" MFL threads, and it comes with 2 DuoTight (pushfit) adapters for 8mm (5/16") hose.  Recommended range of use: 0 to 3.5 bar