Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

Self-closing quick disconnect for ball lock cornelius kegs. Whte/Grey coupling that fits on the gas post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

Push Fit Duotight 8mm (5/16") to 7/16" FFL Thread (fits threaded ball lock). Duotight.

This tapping head (Hydra) with dip tube filter (pressure kit) fits the 4 and 8 L PET Oxebar mini kegs.  The tapping head is designed to fit standard ball lock disconnects making it an inexpensive solution for draft beer and bringing beer anywhere. The tapping head kit includes beer and gas posts, 2,5 bar pressure relief valve and a dip tube including filter. Ideal for any type of drink you want to serve directly from the keg.NOTE: PET Mini Keg sold seperately - Not Included.

Fluidfit® HCF-UNF push-fit connection connection with female 7/16" thread UNF - connector adaptor for threaded ball disconnects. For 3/8" hose. UNF 7/16" and 3/8" pushfit.

Now you can very easily make a mini-keg from an ordinary PET bottle! With these couplings it becomes like a barrel with ball lock couplings and you can transfer the whole end, as if it were a cornelius barrel. Ingenious as a simple growler or for example for cleaning the tap line without needing an empty keg. PET Ball Lock Kit contains:- two plastic ball lock couplings for PET threads- a T-piece (Carbonation Cap Tee Adapter) for PET- a silicone hose of 30 cm.The ball lock couplings work for both beer and gas (CO2).  (bottles not included)

Gas Manifold - CO2 Manifold 2-Way 1/4" Barb - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 3-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 5-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 6-Way 1/4" Barb - can be used to connect 6 kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.