Brass trapetz adapter for 425g co2 flasks, for example Sodastream.

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Connection kit for iTap for carbonation and bottling if you already have iTap, keg for ball couplings, regulator with 3/8" female and sodastream carbonation cartridge. Contains all couplings, adapters and tubing needed (tube comes in a full length that can be cut to suitable lengths ). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.NOTE! Does not include iTap, keg for ball lock, regulator with 3/8" female or sodastream carbonation cartridge.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need. Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use. Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow. This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system. Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. *does not include regulator or gas canister