Reviews

0 reviews

You might also need

CO2 Cylinder 425g (Filled)

CO2 Cylinder 425g (Filled)

A compact Acme threaded (Trapezoidal thread form) CO2 cylinder that works perfect for the homebrewer and the sparkling water enthusiast. With this 425g cylinder you should be able to carbonate 60-80L of beer. Needs a trapets/acme threaded adaptor to be coupled to a regulator.The colour of the cylinder is random.

€20
iTap X for 26mm crown bottles - Counter pressure filler

iTap X for 26mm crown bottles - Counter pressure filler

iTap for 26mm crown bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or counter-pressure fill your bottles safely without any issues. This model comes with a clamp lock for 26mm crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

€131
€109
DEAL
Cornelius Keg 18L Ball Lock with Rubber Protection (USED)

Cornelius Keg 18L Ball Lock with Rubber Protection (USED)

Cornelius keg 18-liter (5 gallons) with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Note: Keg looks and design may vary, pictures are to illustrate only.Height: approx. 565 mmDiameter: about 232 mmWeight: about 4.5kg

€82
Volume discount!
€71 per piece when you buy 2 or more