Bottle Filling

iTap for 26mm crown bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or counter-pressure fill your bottles safely without any issues. This model comes with a clamp lock for 26mm crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

iTap2X is the chameleon of the beer taps where you either fill your glass with fresh beer or countertryweights a bottle safe without problems and with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for crown bottles. (Longneck, etc.). 3/8" barbs for liquid, gas and drain.Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useWarranty serviceBest ratio of price vs quality

iTap X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or fill your bottles safely with counter pressure without any issues. This model comes with a clamp lock for 28mm PET bottles. 3/8" barbs for liquid, gas and drain.The counter pressure bottling method eliminates any contact between the beer and oxygen. As a result, your brew stays fresh and carbonated.- Easy & clean bottling: install the bottle, fill it, remove the bottle. No mess, no foam, no fuss.- Fast filling: you can fill and cap (the capping devices are not included) 50-60 bottles in 1 hour.- The quality/price ratio is impressive: you get a durable device with a 5-year warranty. It fits for both commercial breweries and homebrewers as well.- Minimal drainage losses (only 1%), no foaming.- Quick installation: even if you see an iTap for the first time, you can install it on your own in under 10 minutes. Easy use: CO2 filling with a button, fast filling.- No cartridges or disposable parts.- The drinks bottled with iTap stays fresh and remains its initial flavor up to 90-120 days.- You can bottle any foamy drinks, including beer, cider, soda, etc.

iTap2X for 28mm PET bottles is the chameleon of the beer taps where you either fill your glass with fresh beer or a PET bottle safely without problems. And with iTap2X you can also hook up two different beers at the same time. This model comes with clamping locks for 28mm PET bottles. 3/8" barbs for liquid, gas and drain. Allows dispensing 2 types of drink at the same timeMinimal drainage losses (1-2%)Fast and no-foam bottles fillingLowers the equipment costsExpands the sales when space is limited Produced from high-quality food-grade materialsHigh safety levelHas no disposable removable partsEasy and convenient useBest ratio of price vs quality

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Connection kit for iTap for carbonation and bottling if you already have iTap, keg for ball couplings, regulator with 3/8" female and sodastream carbonation cartridge. Contains all couplings, adapters and tubing needed (tube comes in a full length that can be cut to suitable lengths ). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.NOTE! Does not include iTap, keg for ball lock, regulator with 3/8" female or sodastream carbonation cartridge.

A removable clamp-lock is designed for dispensing drinks into the glass bottles and growlers with a swing top, for iTap and iTap 2 devices.- Fits all iTap dispensing systems- Fast dispensing into glass growlers and swing top bottles- Minimal drainage losses (1%)- A quick switch from one clamp lock to another- Equipment costs minimization: use the same iTap for different bottles and growlers- Made of high-quality food-grade materials- No disposable parts- Easy to use, quick to set up- Warranty service- The best ratio of price vs quality

This clamp-lock is designed for dispensing drinks into the Belgian style 75cl bottles with 29mm crown caps.  Fits all iTap and iTap2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2 (and all X models).

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2.

The handle adaptor is installed instead of an original iTap handle, then a customised handle is installed on it.

iTap PRO is the perfect "all-in-one" solution for homebrewers have to bottle higher volumes or Microbreweries. Fills any glass bottles and growlersFits for bottles with various height and bottleneckCounter pressure method keeps the beer taste and carbonation for up to 90-120 daysProtection from bottles explosionMax capacity 180 bottles per hour1 year warranty serviceEvery device has a passport with serial number

Deluxe in bag. This extendable telescopic siphon makes siphoning so easy. Use if for large and small brews. Put the siphon in the brew, give it a suck and away you go. It has a removable spacer on the bottom to avoid picking up sediment and an easy to use Flow Clip.Don't forget to sterilise your equipment before and after.

Bulk without bag. This extendable telescopic siphon makes siphoning so easy. Use if for large and small brews. Put the siphon in the brew, give it a suck and away you go. It has a removable spacer on the bottom to avoid picking up sediment and an easy to use Flow Clip.Don't forget to sterilise your equipment before and after.

Bottle filler 33cm without end piece, so you can attach a hose to it.Length: 33cmTube diameter: 10mm

Bottle filler 44cm without end piece, so you can attach a hose to it.Length: 44cmTube diameter: 10mm

Bottle filler 33cm with 1m tube for tap

Bottle filler 44cm with 1m tube for tap

Bottle filler for tap with Silicone/PVC-hose connector to classic tap. NOTE: Doe NOT fit on taps with barbs, use the tap thats linked on this page below.

Bottle filler for tap 44cm

With this stainless steel counter pressure filler, you can pour beer and other beverages directly into bottles from kegs without foaming, exposure to oxygen and loss of carbon dioxide. Fits most types of bottles. Duotight compatible.The bottles are filled from the bottom in an oxygen-poor environment because carbon dioxide builds up a back pressure in the bottle before the beer is released. Works best with cold liquid and with a pressure between 0.6 - 1.1 bar.For cleaning, use an alkaline cleaner (PBW or Chemipro OXI) and flush the bottle filler according to CIP (Clean In Place), then rinse through the back pressure filler with water.Then use a disinfectant (Sanipro or Star San) before use.Connect the CO2 hose from the regulator on one side and the beer hose on the other side.Back pressure filler for bottles- Hose nipple size: 5.5 mm on both nipples.- Bottle size: at least 22 cm high with a bottle neck diameter of 14-20 mm (for taller bottles, the range of the back pressure filler can be extended with a piece of hose).- Main valve with three positions: Co2 IN - switched off - beer IN.- Silicone plug 22/17 mm included.- Manufacturer: KeglandInstructions:Click here

New and improved version. In 2005 the BeerGun® bottle filler revolutionized the way homebrewers bottled their kegged beer. Complicated counter-pressure fillers were obsoleted, and bottling became effortless and enjoyable! The patented BeerGun® bottle filler became the overwhelmingly dominant filler of choice and we've helped tens of thousands of homebrewers bottle beer and win countless brewing awards. Something we're very proud of. But at Blichmann Engineering we listen to homebrewers! We've taken your feedback and have created the New BeerGun® bottle filler! More ergonomic, faster and easier to clean, and even more intuitive!What's new?Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valvePositively retained beer seal tip - no more lost tips!Anti-microbial beer hose keeps contamination at bay!Accessory kit now included as standard itemTool free super fast disassemblyIf you have only one gas connection, you can easily split the gas line. For example, you can use a T-connector, a CO2 Manifold.

Handy telescopic counter pressure bottle filler - Bottle without foam or exposure to oxygen. Fits standard beer taps or fit a beer line to the unit. Fits most bottles. It fits standard beer taps and is a great way to rack off a few bottles for competition or package beer into bottles. Easy removal of the telescopic tubing for cleaning! This unit comes complete with wide range of accessories sincluding carbonation cap so you can quick disconnect your beer line, duotights so you can fit a beer line to the unit and other usefull fittings you might need.The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels. It's completely made from stainless steel with no aluminium or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. Its very compact and and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" General thread. We also supply other accessories so you can attach a beer line to this unit for other filling methods too. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature.NOTE: This cannot be used with taps with a vent hole but will fit pretty much all forward sealing taps on the market such as the Nukatap SS, Nukatap FC, Perlick and other brands.Link to Users manual:Click here