Fermentation

FermZilla Hop Bong is a versatile accessory, capable of pressurized dry hopping and oxygen purged hops into fermenters. And also as an inline carbonation/oxygenation accessory.Capacity in Hop Pellets:150g to 180gNamed purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid.Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.Includes:1 x KL05333 Red 35psi PRV1 x KL20176 PCO1881 PRV Cap1 x KL23627 - PCO1881 Male x 2 Inch Tri-Clover (POK)3 x KL03438 - 2 Inch TC Clamp Beaded Seal3 x KL03322 - 2 Inch TC 2 Segment Clamp1 x KL26079 - 2 Inch Hop Bong1 x KL10788 RED Multi Gas Post Plastic Carbonation Cap1 x KL27564 - 2 Inch x 2 Inch Butterfly Valve1 x KL22569 Yellow 17psi PRV1 x KL35965 - 4 Inch TC Pressure Lid with 2 Inch TC PortPlease note that the Hop Bong is not made from glass. It is made from special engineering plastic.

The valve makes it possible to dry hop with a regular soda bottle on a FermZilla. You put some hops in a threaded bottle, attach the valve, and put it onto the lid of the FermZilla. An easy and cheap tool for dry hopping.If you also use a Carbonation Cap T-Piece and a Line Cleaning and Carbonation Cap you will be able to use Co2 to remove the oxygen from the hops.Stainless steel ball valve with a approx. 20 mm bore and O-ring in both ends.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. Stainless steel.This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Stainless Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floar & 60cm Silicone Dip Tube

FermZilla 60cm silicone dip tube and stainless float. Ensure that only the top layer of beer is poured from the Fermzilla/Fermentasaurus.

Insulated Jacket for Fermzilla 55L designed to insulate your FermZilla and to obtain a correct temperature.

FermZilla Plastic Lid. Spare part.

Fermzilla Lid Ring replacement part.

Fermzilla Conical Valve Assembly with the conical plastic part, conical gasket, O-ring and Threaded lid ring.

Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic- Dimensions outside: 560 L x 560 B x 651 H- Dimensions inside: 436 L x 436 B x 531 HSize fits:32 L. Fermenter30 L. FermZilla Flat Bottom MaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.Please observe! The Graviator does not work with steel fermenters.

As the FermZilla/Fermentasaurus containers are a pressure vessel thus they require periodic testing. We recommend that you pressure test the Fermentasaurus containers once every 2 years if you want to keep using the fermenter under pressure. This fitting allows you to hydrostatically pressure test the FermZilla/fermentasaurus tank using a keg and regulator. First fill the fermzilla/fermentasaurus to the brim with tap water. This fitting will screw into the pressure relief valve socket on the pressure lid for the fermzilla/fermentersaurus. You would then connect a swivel nut and barb to this fitting, connected to the luqid out of a keg full of water. You can then connect your regulator to the gas in on the keg and pressurises the system to the test pressure.

This is a simple, reliable and efficient magnetic stirrer for up to 5L flasks. Excellent speed precision. Remains cold even after several days of continuous use. Ensures a high resistance to chemical agents. - High Reliability- Control panel is shielded from liquid spills- Epoxy-coated tough steel casing- Long life operation- Accepts up to 5 liter flasksFeatures- Pale surface for visualization of particles and color changes- Remains cold, even after days of continuous use- Specifically designed for microtitration- Excellent speed control, even at low speed- Simple & Practical- Precision speed regulation up to 1100rpm- Universal mains voltage / frequency range- Light weightTechnical data: Fisher Scientific Microstirrer Magnetic StirrerHeight: 48mmWeight: 0.55KgSpeed: up to 1100RPMMaterial: Epoxy, MetalSpeed Control: Excellent speed control even at low revolutionsSize: 48 H x 120 W x 128 DmmWattage: 0.6WWidth: 120mmVoltage: 100-240VHertz: 50/60HzElectrical Requirements: 100 to 240V, 50/60Hz, 0.6W

Compact magnetic stirrer machine with adjustable speed 0-3600 RPM. Perfect as a yeast starter and propagation of your yeast, up to 3 liters. Power 3W, adaptor with EU-outlet included (12VDC/220V, 1.2m cord). 1pc Magnetic Stir Bar included.Measurements: 12x12cm and 3,2cm heigh.

Provides stable stirring action. The PTFE magnetic stir bar work within a wide range of conditions. Smooth, round profile for a wide variety of applications. White PTFE encapsulated Alnico V magnet core. Autoclavable.MeasurementsLength: 40 mmDiameter: 8 mm

PTFE-coated rod for easy pickup of stirr magnets. Strong magnet, withstands heat, cold and has very high chemical resistance. Magnetic stirrer, stirrer magnets and beakers are ordered separately.Material:PTFE-coated metal with strong magnet.Dimensions: Length 345 mm, diameter 10 mm.

Seals for Conical Dual Valve Tap O-rings are a complete set of replacement O-rings for Dual Valve Tap on Grainfather Conical Fermenter.Spare Part.

Grainfather 2" Tri-clamp Gasket for Conical FermenterSpare Part.

Better Brew Plastic Damejeanne 27,5L

Brewly Lid Seal for CF 30L Fermenter - Spare part

Mangrove Jack - Lid Seal for Stainless Steel FermenterSpare Part.

Conicus Pro 30L is a stainless steel conical fermenter that can handle max pressures up to 2 bars (1 bar working pressure). Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. With a unique 3” sight glass, allowing brewers to observe the beer, level, and fermentation process like never before.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. Conicus Pro by Brewolution.All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume 32 L. (Minimum Brew Size is 12-15L)- Max brew volume: 28-30* L. Read more in FAQs - Min brew volume: 12-15* L. Read more in FAQs - Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 79,5 cm (87 cm with airlock)Diameter at the top: 42 cmWeight Gross: 18 kgWeight Net: 13.5 kg- See product image gallery for dimensions

Conicus Pro 55L is a stainless steel conical fermenter that can handle max pressures up to 2 bars (1 bar working pressure). Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. With a unique 3” sight glass, allowing brewers to observe the beer, level, and fermentation process like never before.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. Conicus Pro by Brewolution.All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume: 57 L.- Max brew volume: 50-55* L. - Min brew volume: 20-25* L.- Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 108,5 cm (115 cm with airlock)Diameter at the top: 42 cmWeight Gross: 21,5 kgWeight Net: 16 kg- See product image gallery for dimensions

The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.  Perfect for Conicus Pro 55L. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:521 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:338 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

FermZilla Heating Wrap Belt 30W- With Velcro Strap (30watts) Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 30W220-240V Dimensions:1000mm x 250mm

Easy-to-use magnetic stirrer with good capacity of 1,5 liters (and more). Infinitely variable speed and durable construction that can withstand a little spill.Material: Durable cover.Speed: 0-1500 rpm.Capacity: 1.5 liters.Power supply: 230VMax Power: 8W

FermZilla Hop Bong Kit (Swedish Pumper) - 2 Inch TC Hop Bong. Named purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory. This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Includes:1 x KL28219 FermZilla Tri-Clover Pressure Lid (including PRV, Bottle caps, 2Inch clamp, seal, PCO1881/Tri clover adaptor)1 x KL10788-Yellow Carbonation Cap PCO1881 (Yellow / Liquid)2 x KL10788 Carbonation Cap PCO1881 (Red / Gas)1 x KL17060 SS Float + 100cm Silicone Dip Tube + Dip Tube Hop Filter1 x KL27564 FermZilla Tri-Conical - 2" x 2" Tri-Clover Butterfly Valve1 x KL26079 2 Inch Tri-Clover - Hop Bong - Sight Glass1 x KL20176 PCO1881 PRV Cap1 x KL05333 Red PRV (35psi/2.5bar)2 x KL03322 2 Inch Tri Clover Clamp2 x KL03438 2 Inch Tri Clover Silicone Beaded Seal Please note that the Hop Bong is not made from glass. It is made from special engineering plastic.Capacity in Hop Pellets150g to 180g

Streamline your fermentation and beer transfers with the Conicus Pressure Fermentation and Bottling set, designed for precision, quality, and efficiency. Whether you’re transferring beer under pressure or using a gravity-fed method, the Conicus Pro ensures your beer remains fresh, clear, and free from oxygen exposure. - Precise Pressure Control: Maintain optimal transfer conditions with the 1,5" Tri-Clamp Spunding Valve, allowing you to fine-tune pressure from 0–3 bar.- Crystal-Clear Transfers: The Float with Dip Tube draws beer from the clearest layer, leaving sediment behind for professional-quality results.- Seamless CO2 Integration: The 2" Tri-Clamp Plate with Gas Post and PRV enables controlled CO2 injection to assist transfers and maintain carbonation.- Versatile Transfer Options: Transfer beer using the 1,5” Tri-Clamp Liquid Ball Lock Post for pressurized keg filling, or use the 1,5” Tri-Clamp Barb Hose Ø10 for gravity-fed methods. Kit contains:- 1x 1,5" Tri-Clamp Spunding Valve 0-3 Bar. Wet Model- 1 x 1.5" Tri-clamp Conicus- 1 x 1,5" Tri-Clamp Silicon Gasket- 1 x 2" Tri-Clamp Plate with Gas Post and PRV- 1 x 1,5” Tri-Clamp Liquid Ball Lock Post- 1 x 1,5” Tri-Clamp Barb Hose Ø10- 1 x Float with Dip Tube- 1 x Tube 8 mm EVABarrier- 2 x Ball Lock Beer Connector, Duotight 8mm

This Hop Bong system is tailored to maximize the hop character of your beers while maintaining an oxygen-free environment to preserve the delicate aromas and flavors. By using our pressurized dry hopper system, you can directly inject hops into your fermenter, ensuring your brew remains fresh and clear. 2" Tri-Clamp Hop Bong Premium: Capable of press-urized dry hopping and oxygen purged hops into fermenters.  2" Hop Bong package, designed specifically for those who value quality and precision in their brewing process. This premium kit includes a 2" sight glass, constructed exclusively from stainless steel and glass, ensuring durability and providing a clear view of the contents.Height of the 2" Hop Bong Premium: 270 mmKit contains:- 1 x 2” Tri-Clamp Sight Glass- 1 x 2" Tri-Clamp Plate with Gas Post and PRV- 1 x 2" Tri-Clamp Butterfly Valve Easy Grip Black Handle- 2 x 2" Tri-clamp- 2 x 2" Tri-Clamp Silicon Gasket

Ideal for active fermentations as it has no pockets to trap wort. Nozzle mount for pigtail sample coil. Easy twist to open handle and quick disassembly. Ease of Use: With its easy twist-to-open handle, the Sample Tap allows for swift access to your fermenting brew, making it simpler than ever to manage the fermentation process. This feature is especially beneficial during those peak fermentation periods when timing and efficiency are key. Maintenance Made Simple: Say goodbye to the tedious cleaning processes. With a quick disassembly system you can easily dismantle the Sample Tap for cleaning, ensuring every nook and cranny is sanitized without hassle. The design is purposefully crafted without pockets to trap wort, eliminating the risk of contamination and off-flavours in your brew. Smart Design: The Sample Tap is uniquely equipped with a nozzle mount for a pigtail sample coil, allowing you to take samples without exposing your beer to the elements. This means you can monitor your beer's progress and make adjustments as needed, ensuring the perfect brew every time. Ideal for Active Fermentations: Designed with the craft brewer in mind, this valve is ideal for active fermentations. Its innovative design ensures a seamless flow and prevents any trapping of wort, making it a must-have for serious brewers aiming for the highest quality in their craft beers. Will fit any 1,5" tri-clamp connection. AISI 304 stainless-steelEasy to cleanEasy to mountNozzle mount for a pigtail sample coilIdeal for active fermentationsNo pockets to trap wortEasy twist to open handleQuick disassembly.Tri-clamp standard

Whether you're a home brewing enthusiast or a commercial brewery, the Pigtail Coil is your solution for assessing carbonation levels and dry hop intensity with precision and ease. Key Features: Precision Sampling: The Pigtail Coil's design incorporates the necessary restriction to accurately measure the carbonation level of your beer. This means you can fine-tune your carbonation to perfection, ensuring every sip meets your exact standards.Dry Hop Clarity: Beyond carbonation, the Pigtail Coil allows brewers to assess dry hop levels accurately. This crucial feature enables the brewer to determine the optimal hop profile for their beer, ensuring the desired aroma and flavour intensity is achieved.User-Friendly Design: Crafted with brewers in mind, the Pigtail Coil is easy to use, making it an indispensable part of your brewing toolkit. Its intuitive design ensures you can take precise samples quickly and efficiently, allowing you to focus more on the art of brewing.Versatility: Ideal for both home brewing setups and commercial operations, the Pigtail Coil adapts seamlessly to your brewing process. Its compatibility with a wide range of brewing equipment makes it a versatile tool for any brewer looking to elevate their craft.Why Choose the Pigtail Coil? Sampling carbonated beer has never been easier or more accurate. The Pigtail Coil not only enhances your ability to perfect your brew's carbonation levels but also empowers you to fine-tune the sensory aspects of your beer, such as aroma and taste. Whether you're experimenting with new recipes or ensuring consistency in your signature brews, the Pigtail Coil is your partner in achieving brewing excellence. Please make sure you have the Sample Valve/Tap Type 2 or find it below in the related products.

The 2" tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: 1,5-inch tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

This tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: Tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

This tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: Tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

This tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: Tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

1.5” tri-clamp Cap and will fit any 1.5" tri-clamp connection Tri-clamp fittings, including the 1.5” cap, are celebrated for their quick clamp union, creating sanitary connections that are easy to assemble and disassemble. This feature significantly enhances the efficiency of your cleaning and maintenance processes, a key factor in producing high-quality craft beers. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard.

2” tri-clamp Cap and will fit any 2" tri-clamp connection Tri-clamp fittings, including the 2” cap, are celebrated for their quick clamp union, creating sanitary connections that are easy to assemble and disassemble. This feature significantly enhances the efficiency of your cleaning and maintenance processes, a key factor in producing high-quality craft beers. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard.