Measuring

The Milwaukee MW802 PRO Combo Meter lets you easily and accurately test pH, conductivity (EC) and total dissolved solids (TDS) using a single meter and integrated probe.Simple, portable and rugged. No more juggling multiple electrodes and wires. Automatic temperature compensaton included. The MW802 is the ultimate solution for pH and nutrient management.Specifications:pH Range: 0.00 to 14.00 pHEC Range: 0.00 to 6.00 mS/cmTDS Range: 0 to 4000 ppmpH Resolution: 0.1 pHEC Resolution: 0.01 mS/cmTDS Resolution: 10 ppmpH Accuracy: ±0.2EC/TDS Accuracy: ±2% Full ScaleCalibration Solutions: M10007 (pH 7.01) M10032 (1382 ppm) M10442B 1500 ppmConversion Factor: 0.68Calibration: Manual at 1 pointTemperature Compensation: Automatic from 0 to 50°CProbe: SE600 combination pH/EC/TDS probeEnvironment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type / Battery Life: 1 x 9V alkaline / 150 hours of useAuto-off: After 8 minutes of non-useDimensions: 7.3 x 3.2 x 1.8 inchesWeight: 5.8 ounces (with battery)pH and conductivity are critical for growers. pH can effect plant nutrient and water uptake and reduce the efficiency of fertilizer, herbicides and pesticides. Managing conductivity helps growers pinpoint fertilizer and other needs.DESIGN FEATURES- The design of the MW802 is focused on simple operation and ruggedness. With a single probe, big screen, easy calibration, the MW802 is exceptionally simple to operate.- A tough meter build and a rugged but replaceable probe means that you can expect years of use.- The Milwaukee PRO Combo meter offers:pH, conductivity / nutrient EC, TDS (ppm) with automatic temperature compensation.A replaceable, integrated pH, EC, and TDS (ppm) probe with a single 3 foot cable for easy use (SE600 probe included).A fiber junction on the pH sensor to reduce contamination when measuring fertilizer solutions.A light weight and portable form factor at just 5.8 ounces with battery and just over 3 inches wide.A large easy to read display.Factory calibration with a simple, single point manual calibration for both pH and EC.A reputation for a rugged build and long lifeSpecialized design for hydroponic, aquaponic, and greenhouse growers.WHAT PEOPLE ARE SAYING"Superb meter, easy to use, great customer service.""Best meter I have ever owned.""The best meter on the market and Milwaukee customer service is the best.""I have owned this meter for almost 8 years and only replaced the probe once. The calibration nobs are easy to use, and even when I am less then gentle with the thing it keeps on going. I wouldn't consider any other meter."CARE AND USEThe MW802 PRO Combo Meter includes both a pH and EC sensor in the SE600 integrated probe. All pH sensors have a limited life and response time gets longer with age. EC sensors are more robust but can still be affected by residue build up. Both need maintenance. Properly maintaining your probe will give you fast, accurate results for longer. So, be sure to order the Milwaukee codes MA9015 and MA9016 at checkout time! This will be needed to help clean and condition the pH/EC electrode before use!Here are our top four tips.1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your probe regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.4. Gently stir the probe in the sample for a faster result.Thank you for considering Milwaukee to help you take your results to the next level.

Lab grade pH 10.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 10.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

Lab grade pH 10.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 10.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

Lab grade pH 4.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 4.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

Lab grade pH 4.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 4.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

Milwaukee pH54 is a waterproof (IP65) compact digital pH-pen with measuring range 0.0 to 14.0 pH, ±0.1 pH accuracy and a resolution of 0.01 pH. Comes with batteries, calibration buffers and instructions in a hard Milwaukee carrying case.Design featuresFast easy to read results with large digital LCD readout.Extreme pH accuracy to  ±0.1 pH with a pH range (0.00 pH to 14.00 pH).Extra Resolution to 0.01 pH.Lightweight and portable.Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.Simple manual one or two-point calibration.Gel-filled, double junction pH electrode for low maintenance and high performance.Fully waterproof to IP65.Over 1500 hours of continious battery life (batteries included).Replaceable pH electrode MA73600.SpecificationspH Range: 0.00 to 14.00 pHpH Resolution: 0.01 pHpH Accuracy: ±0.1 pHTypical EMC Deviation: ±0.1Calibration: Manual, 1 or 2 pointsProbe: Replaceable double junction for extended life (MA73600)Environment: 0 to 50°C / 32 to 122°F; max RH 100%Battery Type: 3 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 1500 hours of continuous useDimensions: 7.9 inches × 1.5 inches (diameter)Weight: 3.5 ounces (99.22 g)Care and useAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

The Milwaukee Waterproof pH55 PRO pH/Temp Tester with ATC is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.DESIGN FEATURESFast easy to read results with large digital LCD readout.Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).Resolution to 0.1 pH.Lightweight and portable.Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.Simple Automatic one or two-point calibration.2 Sets of pre-memorized buffers.Gel-filled, double junction pH electrode for low maintenance and high performance.Over 300 hours of battery life (batteries included).Fully waterproof to IP65.Replaceable pH electrode Mi56P.SPECIFICATIONSpH Range: -2.0 to 16.0 pHTemperature Range: -5.0 to 60.0°C (23 to 140°F)pH Resolution: 0.1 pHpH Accuracy: ±0.1 pHTemperature Accuracy: ±0.5°C (±1°F)Typical EMC Deviation: ±0.1Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)Probe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 23 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: after 8 minutes on non-useDimensions: 254 × 67 × 47 mmWeight: 99.22 gCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

The Milwaukee pH56 PRO pH and Temperature Tester is our most accurate tester with the ability to easily replace the probe for years of use.DESIGN FEATURES- Fast easy to read results with large digital dual LCD readout- Extreme pH accuracy to  ±0.05 pH with an extended pH range (-2.00 pH to 16.00 pH)- Lightweight and portable- Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading- Simple push button, automatic one or two-point calibration with 6 saved calibration points- Gel-filled, double junction pH electrode for low maintenance and high performance- Auto shut off and low power demand for a 300 hour extended battery life (batteries included)SPECIFICATIONSpH Range: -2.00 to 16.00 pHTemp Range: -5.0 to 60.0°C / 23.0 to 140.0°FpH Resolution: 0.01 pHTemp Resolution: 0.1°C / 0.1°FpH Accuracy: ±0.05 pHTemp Accuracy: ±0.5°C / ±1°FpH: Typical EMC Deviation ±0.02 pHTemp: Typical EMC Deviation ±0.3°C / ±0.6°FCalibration automatic, 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)Temperature Compensation: Automatic from -5 to 60°CProbe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 32 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: After 8 minutes of non-useDimensions: 7.9 inches × 1.5 inches (diameter)Weight: 3.5 ouncesCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

Milwaukee pH600 is a compact digital pH-pen with measuring range 0.0 to 14.0 pH, ±0.1 pH accuracy and a resolution of 0.1 pH. Comes with batteries, calibration screw driver and instructions in a hard Milwaukee carrying case.Design features- Fast, accurate results with digital LCD readout.- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.- Simple 1 point calibration with an easy-to-use trimmer located on the back of the tester to protect from accidental splashes.- Cap to protect the pH sensor and keep it wet when stored upright.- Low power demand for extended battery life (batteries included).- Comes in a hard carrying case complete with calibration screw driver, batteries and instructions.SpecificationspH range: 0.0 to 14.0 pHResolution: 0.1 pHAccuracy: +/- 0.1 pHTypical EMC Deviation: +/- 0.2 pHCalibration: Manual, 1 PointEnvironment: 32°F to 122°F (0 to 50°C) 95% RHApproximate dimensions: 6 x 1.2 x 0.95 inchesWeight: 3 ounceBattery Type: 3 x 1.5 V Alkaline (included)Battery Life: 700 hoursUse and careAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Pen will give you fast, accurate results for longer.Here are our top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water.2. Clean your Pen regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Pen in the sample for a faster result.

Lab grade pH 7.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 7.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

Lab grade pH 7.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing calibration solutions from powder.Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using expired calibration solution. Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.DESIGN FEATURESpH 7.01 Calibration Buffer SolutionFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readingsSealed against light and airIdeal for on-the-spot calibrationSimply open, insert the tester or electrode into the sachet and calibrateColor coded for easy identification

MA9015 is a lab grade electrode storage solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens.To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out. Properly storing your pH electrode in a solution keeps the glass membrane well hydrated which maintains proper function and provides accurate readings.MA9015 also helps keep the junction in your pH and ORP electrode flowing which is critical for fast results.DESIGN FEATURESFundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings.Formulated to minimize organic growth on your electrode.Sealed against light with air tight, tamper proof cap.Factory blended to precise standards in a dedicated, temperature controlled environment.Simply open and add to the cap of your electrode or tester.USE:Replace when it gets dirty or evaporates. It must be always filled up till the mark on cap of the pH-meter.

The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter.DESIGN FEATURES- Fast, accurate results with large digital LCD readout.- Extended temperature range: -50 to 150°C (-58 to 302°F)-Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.- Easy, flexible 1 meter cable for hard to reach places.- Stainless Steel pointed probe for easy fruit penetration and easy cleaning.- Long battery life, approx. 1 year. (batteries included)- High accurate digital readings.- Clean and SafetySPECIFICATIONSTemperature Range: -50 to 150°C (-58 to 302°F)Resolution: 0.1°CAccuracy: ± 0.5°C (-20 to 90°C)Typical EMC Deviation: ±0.3°CProbe: Stainless Steel with 1 m cableEnvironment: 0 to 50°C (32°F to 122°F), 95% RHBattery Life: approx. 1 yearBattery Type: 1 x 1.4V (included)Package Dimensions: 8.6 x 3.6 x 1.9 inches (225 x 91 x 47 mm)Packaged Weight: 4.9 ounces (140 g)Here are our top four tips. 1. Always clean you stainless steel probe after use.2. Pay close attention to the direction of the probe's sharp tip.3. If the LCD begins to fade, change your batteries.4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.WHAT PEOPLE ARE SAYING"Accurate results and calibrated right out of the box.""Must have for any aquarium owner.""Good value. Easy to use. Consistent.""No dangerous chemicals""Used it in the field for checking the fruit to harvest, was great"

The Milwaukee TH310 compact digital thermometer is specifically designed to help professionals and home owners regulate their home brew, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.Thousands of people have relied on the Milwaukee TH310 compact Digital Temperature Meter to read temperature in all types of applications. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries, wineries and labs the TH310 Stainless Steel Stick probe is your quick temperature meter.DESIGN FEATURESFast, accurate results with large digital LCD readout.Extended temperature range: -50 to 150°C (-58 to 302°F).Cal-Check feature.Fast NTC sensor response.Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.Easy sharp Stainless Steel temperature shaft for quick penetration.Stainless Steel probe for easy cleaning.Long battery life, approx. 3000 hours of continuous use (batteries included).High accurate digital readings.Clean and SafetySPECIFICATIONSTemperature Range: -50 to 150°C (-58 to 302°F)Resolution: 0.1°CAccuracy: ± 0.5°C (-20 to 90°C)Typical EMC Deviation: ±0.3°CProbe: Stainless SteelEnvironment: 0 to 50°C (32°F to 122°F), 95% RHBattery Life: approx. 3000 hours of continuousBattery Type: 1 x 1.5V (included)Package Dimensions: 10 x 2.6 x 1.9 inches (254 x 67 x 47 mm)Packaged Weight: 3.5 ounces (100 g)Here are our top four tips. 1. Always clean you stainless steel probe after use.2. Pay close attention to the direction of the probe's sharp tip.3. If the LCD begins to fade, change your batteries.4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.WHAT PEOPLE ARE SAYING"Accurate results and calibrated right out of the box.""Must have for any aquarium owner.""Good value. Easy to use. Consistent.""No dangerous chemicals""Used it in the field for checking the fruit to harvest, was great"

pH-sticks 2,8-4,6 20-pack

pH-sticks 3,8-5,5 20-pack

pH-sticks 5,2-6,8 20-pack

Practical set of five plastic cups in sizes 50, 100, 250, 500 and 1000 ml.

Plastic container with lid 215ml. Made in Polypropylene plastic with snap cap of polyethylene (LDPE). Plastic container with lid 215mlHeight: 3 cmDiameter: 10 cm.Quantity: 1pc

Plastic container with lid 50mlMaterial: Polypropylene plastic with polyethylene snap cap (LDPE). Dimensions: Height 5 cm, the diameter of the opening 4 cm.

Plastic dropper bottle 500ml

Half-liter measuring jug graduated in deciliter, made in durable SAN-plastic. The measure also has grams scales for flour, rice and sugar. Volume: 0,5 liters. Dimensions: Diameter 11 cm, height 11 cm. Material: Glass and impact resistant SAN plastic.

Affordable disposable plastic pipette with graduation 0,5-3ml.

Plastic pipette 3ml 10-pack

Affordable disposable plastic pipette with graduation 0.5 - 3 ml. Material: polyethylene. Length: 160 mm. Graduation: 0.5 - 3 ml.

Extra long 1,5ml disposable pipette with graduation.

Storage container in plastic with a substantial screw cap for chemicals etc. Material: semi-transparent HDPE (high density polyethylene). Volume: 100ml. Dimensions: 106x45x45 mm. Diameter opening 23 mm.

Container in sturdy plastic with a substantial screw cap for chemicals etc.

Container in sturdy plastic with a substantial screw cap for chemicals etc.

Original Pyrex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Pyrex Borosilicate glass. Idal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.- Complies with DIN ISO 24450- Erlenmeyer pattern- Manufactured from Pyrex borosilicate glass- Excellent thermal performance- High resistance to chemical attack- White enamel graduations and marking spot- Graduated to capacity- Printed with Trace Code for downloadable batch certificate- Batch certificate available to download from www.scilabware.com- Made in Great BritainPyrex Wide-Neck Erlenmeyer Flask 3000mlVolume: 3000 mlDiameter: 187 mm (at the base)Height: 310 mmOpening inner diameter: 43 mm

The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.- Complies with ISO 3819 and DIN 12331- Manufactured from Pyrex borosilicate glass- Excellent thermal performance- High resistance to chemical attack- Printed with Trace Code for downloadable batch certificate- Batch certificate available to download from www.scilabware.com- White graduations and marking spot- Made in Great BritainPyrex Griffin Beaker 150mlVolume: 150 mlDiameter: - mmHeight: - mm

The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.- Complies with ISO 3819 and DIN 12331- Manufactured from Pyrex borosilicate glass- Excellent thermal performance- High resistance to chemical attack- Printed with Trace Code for downloadable batch certificate- Batch certificate available to download from www.scilabware.com- White graduations and marking spot- Made in Great BritainPyrex Griffin Beaker 400mlVolume: 400 mlDiameter: 80 mmHeight: 110 mm

Mix and store a wide range of culture mediums with these glass reagent bottles. Pyrex™ Borosilicate Glass Reagent Bottles with Polypropylene Cap and Pouring Ring feature a high chemical resistance and are designed with sloped shoulders for smooth pouring.- Bottles complete with polypropylene cap and drip-free pouring ring- Complies with ISO 4796- Printed with Trace Code for downloadable batch certificate- Sloping shoulders for smooth pouring action- White graduations and marking spot- Manufactured from temperature and chemically resistant borosilicate glass- For use up to 140°C- Made in Great BritainPyrex Media Bottle 500mlVolume: 500 mlDiameter: 86 mmHeight: 176 mmThread size: 45 mm

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. The Google Play Android App can be downloaded via the link below.https://play.google.com/store/apps/details?id=io.rapt The Apple App Store RAPT App can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device.  It also gives you the added functionality of push notifications to your mobile device This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal (https://app.rapt.io/).  This greatly reduces the need for handwritten records of your brew day as it's all done automatically.  The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main units probe and this digital thermometer. This unit can also be setup to get push notifications to your mobile phone of when to sparge for example.Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the probe is.Greater accuracy for a more repeatable recipe that results in much better beer! Specifications:20cm Probe Length with sharp tip~ Please remove the black plastic tip before use. That is for storage to avoid punctures / injury.100cm Cable LengthMagnetised Backing Plate (Orange)2 x AAA Batteries (included) Please note, the LCD display and button are not water resistant. If you get liquid into these areas it may damage the accuracy / visibility.

RAPT Pill - Clear Housing (Male Threaded - Bottom Piece). Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this BLUE coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this GREEN coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this RED coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

The RAPT Pill provides accurate real-time density (SG) and temperature measurement and control via the WiFi/Bluetooth integration with the RAPT mobile app/RAPT IOT. Made to measure in your fermenter!RAPT Pill provides accurate specific gravity (SG) and real-time temperature logging and control via wifi/bluetooth. The RAPT pill functions as both a hydrometer and thermometer for real-time gravity testing, enabling instant gravity and temperature measurements and also logs from inside the fermenter during fermentation.The RAPT Pill has many advantages over other wireless hydrometers and thermometers including rugged design, better ergonomics, sanitary design and less prone to errors as a result of hops, krausen or CO2 bubbles generated from fermentation.Specifications:The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!Note:Make sure the RAPT pill is charged for 24 hours before use. This is to ensure that it is fully charged and that the battery is calibrated.When the RAPT Pill is connected via USB-C and connected to wifi, the firmware will automatically update to the current version (if needed). Pill must be connected via USB-C and connected to Wi-Fi to receive firmware updates. What is RAPT?RAPT IOT Hub is a free service where all RAPT-enabled products can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to remotely control your devices giving you absolute control over your device no matter where you are. The RAPT portal enables you to make complex temperature profiles involving different temperature settings over time, meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so that you can receive email notifications if something does not go according to plan.There is no limit to the number of RAPT devices you can connect RAPT IOT Hub. This is unlike other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.Please note: RAPT Pill is fully Wi-Fi and Bluetooth compatible. Currently, it can be fully integrated with wifi. Bluetooth integration will be enabled with a later firmware update.GoogleThe Google Play Android app can be downloaded from the link below.https://play.google.com/store/apps/details?id=io.raptAppleThe Apple App Store RAPT app can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website is rendered to a mobile device screen increasing the usability on your device. It also gives you the added functionality of push notifications to your mobile device."

Charge your Pill wirelessly with this easy-to-install upgrade kit from KegLand. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud. No need to take your RAPT Pill housing apart for charging! Or even to connect to the RAPT Captive Portal. Includes:1 x USB-C Wireless Charging Coil2 x Adhesive Weight Pads1 x USB-A to USB-C cord (AU power plug not supplied)1 x Black RAPT Wireless Charging Dock (USB-C)If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).See video below how to update your Pill:

Simax graded and sterilizable bottle in heat- and chemical resistant borosilicate glass. With blue screw capsyl of plastic. Simax Glass Bottle Borosilicate 100ml Volume: 100 ml. Dimensions: Diameter 56 mm, height with capsule 105 mm. Sterilizable.

Simax graded and sterilizable bottle in heat- and chemical resistant borosilicate glass. With blue screw capsyl of plastic.Simax Glass Bottle Borosilicate 500ml Volume: 500 ml. Dimensions: Diameter 86 mm, height with cap 180 mm.

Squirt bottle 250ml with long squirt tube.

Classic brewing thermometer made of glass. Scale is -10 till 110 degrees celcius. 30cm in length.

Thermometer Floating

Thermometer LCD 0-30 degrees. XL model length 21,5cm and height 2,5cm. Measurement range 0-30 degrees C.

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

This LCD-strip thermometer covers normal wine fermentation temperatures 14-30 degrees Celcius. This thermometer is self-adhesive so you can attach it to the outside of the fermenter for constant monitoring. Very practical thing that always sits where it should.Bulk-pack