Pressure Relief Valve, releases at ca 2,4 bar. Gasket included.

Pressure Relief Valve, releases at ca 1 bar. Gasket included.

Manometer Low Pressure 0-100 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-7 bar (0-100 psi).This is the same pressure gauge that comes fitted to the MK4 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Manometer Low Pressure 0-4500 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-300 bar (0-4500 psi).This is the same pressure gauge that comes fitted to the MK4/MK5 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need. Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use. Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow. This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system. Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. *does not include regulator or gas canister

Dual Pressure CO2 regulator MK4. Precise regulator of high quality. These are 2 MK4 regulators that are connected together, so that you get 2 outputs with individual pressure adjustment.  Thread type for connecting CO2 bottle: Type 30 (Australia/NZ), compatible with Nordic CO2 standard DIN-477 No. 6 / W 21.8 x 1/14" The outputs have 1/4" MFL threads, and it comes with 2 DuoTight (pushfit) adapters for 8mm (5/16") hose.  Recommended range of use: 0 to 3.5 bar