Keggning

This kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver. Designed to suit 8mm (5/16") Evabarrier Tubing.  It's compatible with both the 4mm ID Tubing here or 5mm ID here. Specifications:1. Suits pressures 0-15psi (but with different guages the unit can go above 100psi)2. Made from food grade acetal3. Stainless screws4. 8mm (5/16") push on both sides

Fully assembled kit with Ball lock coupling and overpressure valve with manometer. If you want to ferment under pressure on e.g. FermZilla, this is the solution for you! The adjustment screw on the valve makes it easy to increase or decrease the set pressure.The parts can be easily disassembled for cleaning. Including: 1x BlowTie 2 Spunding Valve with 0-15psi pressure gauge (can be replaced)1x Duotight 8mm (5/16") Ball Lock for CO21x Intermediate piece 8mm (5/16")

Kegland has created the world's smallest digital manometer with a backlit screen. It is robust, very accurate and has a long battery life (the battery lasts for several years if it is only read once a day). The pressure gauge can display the pressure in units such as PSI, KPA and BAR. It can measure pressures up to 6.2 bar (90 psi). It is perfect for Inline Regulator, Blowtie2 and Mini 360 Core Actuator Regulator.To display the pressure value, press the red button. To turn on the backlight, hold down the yellow button. To select device, press the yellow button several times. The screen turns off automatically after 15 seconds to save battery. Please note that the pressure gauge is only intended for gas and must not be exposed to liquid. Always use a check valve if there is a risk of backflow to the regulator.Specifications:Accuracy: +/- 1% at 20°C< br />Battery: CR2032 (included)Battery time: Over 2 years when reading once per day.Size: 27 mm x 27 mmDimensions of coupling: Ø 7.8 mm with O-ring.

The Duotight Flow Stopper - Automatic Keg Filler (KL09393) is an fantastic device designed to streamline the keg filling process for homebrewers. This product,  offers a hassle-free method of filling kegs, or transferring between kegs during filtering or after fining. It is particularly useful because it attaches to the gas post of your keg and automatically cuts off the flow once the keg is full, thus preventing overfilling and spillage of beer. Some of its key features include compatibility with Duotight fittings, ensuring a secure and leak-free connection, and the ability to work with a BlowTie spunding valve. When used with the BlowTie, it allows you to apply head pressure to the keg, enabling control over the flow speed and reducing foam during the filling process.For this setup, a short length of 8 mm OD EVABarrier tubing is required to connect the BlowTie to the outlet of the Flow Stopper. This flow stopper includes:2 x duotight 5/8" thread x 8mm pushfit (for hose)1 x duotight Elbow pushfit 8mm1 x duotight straight 8mm pushfit x 7/16" thread for threaded ball lock1 x ball float1 x stainless spring1 x acrylic sight glass (with 5/8 male thread on either side)*Colours of the floating ball and joiners may vary. You need to buy a ball lock with a thred if you do not have one. 

Manometer Low Pressure 0-4500 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-300 bar (0-4500 psi).This is the same pressure gauge that comes fitted to the MK4/MK5 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Manometer Low Pressure 0-100 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-7 bar (0-100 psi).This is the same pressure gauge that comes fitted to the MK4 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Actuator Regulator in a robust and functional design for Sodastream cylinder and Co2 Cartridges w/thread. The Co2 flow is first activated when the piston at the top is screwed down into the pawl of the Co2 cylinder or penetrates the cartridge, ensuring that no Co2 is lost or escapes before the Co2 cylinder or cartridge is fully in place.Remove the bottom peace when mounting the regulator on a Sodastream cylinder. The design of the regulator allows for the cylinder to hang on the side of a Cornelius keg.- 2 outputs, one at a 45° angle, which fits a normal plastic ball lock and one at a 90° angle for stainless steel ball locks.- Coupling with thread that fits ball locks- 6.5mm (1/4") Duotight compatible hose barb- The manometer is well protected by a metal housing. The manometer can be interchangeable with other scales.- 65 psi/4.5 bar pressure relief valve which can be interchangeable with other pressure relief valves. Please note this is not compatible with 2 or 6 kg Co2 cylinders.WARNING:Do not overtighten the regulator onto your Co2 cylinder. It is recommended to use a spanner to hold the Sodastream cylinder while attaching and detaching the regulator.

Dual Pressure CO2 regulator MK4. Precise regulator of high quality. These are 2 MK4 regulators that are connected together, so that you get 2 outputs with individual pressure adjustment.  Thread type for connecting CO2 bottle: Type 30 (Australia/NZ), compatible with Nordic CO2 standard DIN-477 No. 6 / W 21.8 x 1/14" The outputs have 1/4" MFL threads, and it comes with 2 DuoTight (pushfit) adapters for 8mm (5/16") hose.  Recommended range of use: 0 to 3.5 bar

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both kPa, Bar and PSI.The outlet has 1/4" MFL threads, and it comes with a DuoTight (pushfit) converter to 8mm hose.NOTE: This regulator is sold with the Green 65PSI (4.5 BAR) pressure relief valve.

KegLand charger kits are made from machined anodised aluminium, no cheap plastic here!This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect (Stainless Steel Gas MFL will require teflon tape) then using the needle valve adjust how much pressure you need.Our Premium Regulators do not come with CO2 bulbs/cartiges. You will need to purchase these 16g bulbs separately from our website. Alsd widely available at large supermarkets if you're in dire need.Please note* MFL Grey disconnect and gas cartridge are not included.

Kegland Oxygen Flow Meter with 8mm Duotight. Pure oxygen is the best way to get your yeast off to a cracking start. Simply use this high pressure and high capacity disposable tank to boost dissolved oxygen levels in your cooled wort.Oxygen is great for use with high gravity beers or pilsners where you are trying to build up a large population of yeast.We would recommend the use of a diffusion stone. These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster. If you want a really nice optoin we would recommend the use of this oxygenation wand and this is a bit more erganomic as you have a rigid stainless tube to force the stone to the bottom of the fermenter rater than it floating to the surface.This flow control device is designed to be used with our oxygen cylinder and regulator that can be purchased separately.InstructionsAttach the regulator to to the top of your disposable cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended)NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmMaterial: 304 Stainless steelDatasheetClick here to open the datasheet

Small keg with quick-connectors for gas and beer. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 10 liters Height: 49 cm (54,5 cm incl. quick connector valve) Diameter: 17.5 cm Weight: 1950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 3 liters Height: 27.5 cm (33 cm incl. quick connector valve) Diameter: 13.5 cm Weight: 950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 5 liters Height: 28 cm (33,5 cm incl. quick connector valve) Diameter: 17,5 cm Weight: 1280 g Manufacturer: Mangrove Jack's

This tapping head (Hydra) with dip tube filter (pressure kit) fits the 4 and 8 L PET Oxebar mini kegs.  The tapping head is designed to fit standard ball lock disconnects making it an inexpensive solution for draft beer and bringing beer anywhere. The tapping head kit includes beer and gas posts, 2,5 bar pressure relief valve and a dip tube including filter. Ideal for any type of drink you want to serve directly from the keg.NOTE: PET Mini Keg sold seperately - Not Included.

Nitrous Oxide N2O cartridges for soda siphones, cream siphons can be used in soda siphones or along with adapter to mini regulators. Nitrous Oxide N2O 8g 10-pack contains: 10 pcs cartridges of stainless steel. A cartridge contains 8.4 grams of gas. (NOTE! Appearance and lable may vary)

O-ring for Cornelius Keg Lid

O-ring for Cornelius Keg Valves. 1pc.

OxyTurbo Double 3-clock Regulator

OxyTurbo Single Regulator (1 clock)

OxyTurbo Single Regulator 2-clocks

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. The keg is used with a separate tap with carbonation capsule. The beer shelf life is several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. If you introduse air into the keg, the beer should be consumed within a few days from the keg is opened. The keg can also be used with a separate tap with carbonation capsule. If you serve the beer without introducing beer with the built-in tap, the beer may hold for several weeks. NOTE: Prime the beer with 2-3g/L sugar.Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.Add rubber plug, se below.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors.1/2" (12.7mm) outer diameter och 3/8" (9,5mm) inner diameter.Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C.Outer diameter: 1/2" (12.7mm)Inner diameter: 3/8" (9,5mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming.Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 5/16" (8 mm)Inner diameter: 5,4 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

A complete PET 20L kit Oxebar with, regulator, restrictor tube tap kit and gas bottle included.

PET Keg 20L Oxebar Amber from Kegland with Ball Lock connectors, Dip Tube, Floater & Handle is a very easy and convenient way to store and transport beer compared to heavy and bulky steel kegs like Cornelius kegs. It's a very inexpensive way to serve draft beer and bring beer to all kinds of events. Because it can be washed and reused, it's also an inexpensive way to store your beer. Do not exceed 4 Bar / 65psi. With the special polymer mixture, the oxygen barrier is improved three times compared to regular PET. Beer can easily be stored up to 6 months in these kegs. Diameter 235mmHeight 640mm  Do not exceed 4 Bar / 65psi. Contains:- 20L PET Keg Oxebar Amber Mono Barrier- Lid with handle- Green relief valve (65 psi/4.5 bar)- 1 meter silicone hose (dip tube) with floater and filter- Red Ball Cap for FermZilla, Carbonation Cap- Yellow Ball Cap for FermZilla, Carbonation Cap

Mini Keg PET Oxebar 4L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psi Diameter:155mmHeight: 325mmFor dispensing we recommend the specially designed tapping head.

A complete minikeg kit Oxebar with gas bottle included.

Mini Keg PET Oxebar 8L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psi Diameter: 155mm Height: 520mm For dispensing we recommend the specially designed tapping head.

A simple plastic tap with 1/4'' stem that fits directly to 1/4'' Pushfit/John Guest fittings.

A simple plastic tap that attaches directly to the beer line. 7 mm (1/4") barb.

Adjustable pressure valve with manometer. Can handle pressures up to 2 bar / 30 psi. 1/4" MFL.

Cap where a Pressure Relief Valve can be mounted. The cap has a standard PET bottle thread. Please Note: Never exceed the pressure capabilities of your container. Pressure Relief Valves are not spunding valves!

Regulator for CO2 cylinder with dual outputs and one manometer. Perfect if you want to divide the CO2 between two kegs for example.IN: W21.8*1/14 RH (CO2 coupling) OUT: Quick couplings

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin tubing (2m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

This Hose Kit that makes it very easy to rinse kegs with water. Its also perfect if you want to fill a keg with water for making sparkling water. Fits ball lock cornelius kegs, and other kegs with ball lock disconnects. The threaded ball lock disconnects fits both gas and liquid (beer) ball lock posts. Here's how you can clean Cornelius kegs:1. Release the excess pressure in the keg and open the lid. Empty if there is any left.2. Connect the gardena coupling to a water tap and the ball-lock disconnect to the keg.3. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.4. Set the barrel up and fill up with hot water and add e.g. PBW.5. Replace the lid and flush some detergent through both gas and liquid posts and the safety valve. Leave for about 15 minutes.6. Release the excess pressure and open the lid. Empty the cleaning agent (or transfer to the next keg if you are cleaning several at the same time).7. Connect the gardena coupling to a water tap and the disconnect to the keg.8. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.9. Sanitize the keg with e.g. Star San just before filling the next batch. Tip: Buy a threaded PET adapter and you can also easily rinse your beer lines too.

Transfer Kit 1: Closed Transfer - Fermenter to Keg (Ball-Lock)

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Gas Manifold - CO2 Manifold 2-Way 1/4" Barb - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 2-Way 1/4" MFL - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 3-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.